2014 Bobcat T870 Compact Track Loader Forestry Package Skid Steer  $35,000 (asking)

HIGH FLOW HYDRAULICS!

Manufacturer: Bobcat
Model: T870 Compact Track Loader Forestry Package
Year: 2014
Hours: Approx. 3,380 hours
Hydraulics: Factory High-Flow
Cab: Factory enclosed cab with HVAC (front door included; currently removed due to broken glass (glass replacement needed))
Condition: Good working condition, normal cosmetic wear consistent with contractor use

Attachments:
OEM Bobcat 88" heavy-duty general purpose bucket
• Stamped ID visible: "88 SD C/A BUCKET – Bobcat Co – Made in USA"
• Standard Bobcat quick-attach
• Cutting edge and teeth present with visible wear consistent with age
• Structurally sound; cosmetic rust and wear only
• Suitable for skid steers and compact track loaders (T870 class)
Virnig Pallet Forks
Condition: Very good used condition. Forks are straight and solid. Frame and backrest are straight with no bends. Normal wear from use, nothing that affects how they work. Ready to put straight to work.

What this is good for: Great for pallets, block, stone, pavers, lumber, and general material handling. Heavy-duty forks.

Fork Details: 

• 48" long forks
• 4" wide, 1.5" thick tines
• Rated for 5,500 lbs (per factory label)
• Skid steer quick attach
• Virnig brand
• Serial #: 261193

Dayton Diesel Forced-Air Torpedo Heater 650k BTU  $950 each

2 AVAILABLE

Manufacturer: Dayton
Model: 4XA50C
Type: Portable oil-fired (diesel) forced-air heater
Rated Output: 650,000 BTU
Electrical: 120V (ignition, fan, controls)
Controls: Integrated thermostat control
Condition: Used, commercial jobsite condition; normal cosmetic wear, structurally sound

Dayton Diesel Forced-Air Torpedo Heater 400K BTU - $650

Manufacturer: Dayton
Model: 3VE531
Type: Portable oil-fired (diesel) forced-air heater
Rated Output: 400,000 BTU
Electrical: 120V (ignition, fan, controls)
Controls: Integrated thermostat control
Condition: Used, commercial jobsite condition; normal cosmetic wear, wheels and frame intact. Functions as it should

Husqvarna K760 Cut-Off Saw  $699

Manufacturer: Husqvarna Construction
Model: K760
Type: Gas-powered cut-off saw / concrete saw
Engine: 74 cc X-Torq® 2-stroke
Max Blade Size: 14 in (350 mm)
Max Cutting Depth: 5 in (125 mm)
Fuel: Gasoline (2-stroke mix)
Features: X-Torq® engine technology, reduced fuel consumption and emissions, active air filtration, water kit compatible for dust suppression.
Typical Uses: Concrete, asphalt, masonry, and metal cutting. Commonly used for flatwork, utility trenches, pavers, and demolition.
Condition: Used, commercial jobsite condition. Normal cosmetic wear from use. Blade included as shown.

Husqvarna K770 Cut-Off Saw  $699

Manufacturer: Husqvarna Construction
Model: K770
Type: Gas-powered cut-off saw / concrete saw
Engine: 74 cc X-Torq® 2-stroke
Max Blade Size: 14 in (350 mm)
Max Cutting Depth: 5 in (125 mm)
Fuel: Gasoline (2-stroke mix)
Features: X-Torq® engine technology, reduced fuel consumption and emissions, active air filtration, water kit compatible for dust suppression.
Typical Uses: Concrete, asphalt, masonry, and metal cutting. Commonly used for flatwork, utility trenches, pavers, and demolition.
Condition: Used, commercial jobsite condition. Normal cosmetic wear from use. Blade included as shown.

EBARA Submersible Pump – Unit 1  $500

 140 GALLONS PER MINUTE (GPM)

Manufacturer: EBARA Pumps Americas Corporation
Model: 50DWXAU6.75S
Type: Submersible dewatering / wastewater pump
Motor: 1 HP, single-phase
Electrical: 115V, 60 Hz
Construction: Stainless steel housing
Discharge: 2" outlet (typical for this series)
Typical Uses: Construction site dewatering, pits and sumps, drainage, light wastewater applications. Commonly used by contractors, plumbers, and utility crews.
Condition: Used; normal cosmetic wear from jobsite use. No visible cracks or structural damage.

Manufacturer: EBARA Pumps Americas Corporation
Model: 50DWXAU6.75S
Type: Submersible dewatering / wastewater pump
Motor: 1 HP, single-phase
Electrical: 115V, 60 Hz
Construction: Stainless steel housing
Discharge: 2" outlet (typical for this series)
Typical Uses: Construction site dewatering, pits and sumps, drainage, light wastewater applications. Commonly used by contractors, plumbers, and utility crews.
Condition: Used; normal cosmetic wear from jobsite use. No visible cracks or structural damage.

We have a steel skid steer hopper funnel attachment we used for bulk material such as decorative rock. It measures about 8 foot wide by 5ft 3in. Stands 4ft tall. The inside hole at bottom of the hopper is 2 1/2 ft by 2 1/2 feet. No markings or manufacturer plate to advise model number on.

We have power tools that we no longer use. They all function. Only one we couldn't test was the Paslode framing nailer and that looks next to new. Take one, take all. Open to offers.

Bosch Hammer Drill SDS-Max RH540M - $300
Bosch Hammer Drill Bull Dog 80523 - $150
Bosch Hammer Drill Bull Dog 70322 - $150
Hilti Hammer Drill - $250
Dewalt Reciprocating Saw  - $50
Milwaukee Reciprocating Saw - $80
Makita Reciprocating Saw Cordless - $90
Makita Grinder - $50
Heavy Duty Commercial Tile Saw - $800
Husqvarna Masonry Saw - $650
Paslode Framing Nailer - $275

Above picture is of another unit we sold. This listing is for a BRAND NEW setup. We have a 51 gallon Aluminum Tank Industries fuel cell refueling tank. This is brand new set up that has never been installed, pump and tank. The pump is a Roughneck 12V heavy duty pump. The pics of installed units are just to show what it looks like. You'd be getting it not installed and still wrapped from shipping and manufacturer.

Specs from the manufacture of tank:
Dimensions: 60 1/2" L x 9" W x 23 1/2" H
Commercial grade lockable vent/prevent filler cap
Fully baffled to reduce movement of contents
Add 2-1/2” for cap height
Two - 2” npt reinforced bu ngs for superior strength
3/8” npt drain
Hold down brackets
Mounting tabs extend out 1-1/2”
Pressure and leak detection test

Pump and handle info:
12 volt Heavy-Duty Fuel Transfer Pump 15 gallons per minute

Handle has auto-shut off, the pump is equipped with a bypass to return fuel to tank

Price is for ONE post.

We have probably 40+ green u posts bought from the big box retail stores. Some are new and others have been used but still in good shape otherwise we'd throw out. Most are 6-7feet. Might be a few smaller and older posts

We have multiple rolls of corrugated pipe. Majority have the sock in place. Some without. A couple are the full 100 ft and others are less, maybe 30-50 feet.

Full rolls - $50
Half rolls - $30

We ordered bulk for slip fence and looking to sell all. Will just need to get lumber for when ready to install.

4" black post caps - 88 caps
4"x8.5'x.125" Recessed Black Blank Posts - 88 posts
Top Rail F/3000 Regis Series - 188 top rails

Manufacturer: Milwaukee Electric Tool Corporation
Model / Series: Milwaukee Dymodrill (1‑1/4" spindle thread)
Type: Electric diamond core drill (rig-mounted)
Capacity: 1‑1/4" (32 mm) to 5" (127 mm) core bits
Spindle: 1‑1/4"‑7 threaded spindle
Electrical: 120V corded
Mounting: Stand-mounted (anchor/vacuum base compatible depending on stand)
Typical Uses: Concrete and masonry core drilling for plumbing penetrations, electrical conduit, HVAC sleeves, and structural openings. Commonly used by concrete contractors and utilities.
Condition: Used, heavy-duty commercial condition. Shows cosmetic wear from jobsite use. No visible cracks in housing. Sold as shown.